The answer is yes. They are cuttable just like the wood. This article will introduce you to the tools used to cut WPC decking and WPC fence, preparations for safety, when to cut, how to cut them correctly, etc.
WPC fence panels are produced using similar components as WPC decking, WPC Cladding and other wood plastic composite items. It is made of recyclable wood fiber and recyclable plastic. Very much like wood plastic composite decking, wood plastic composite wall boards are additionally cuttable. Furthermore, can be sliced to any length or level on a case-by-case basis.
Cutting Tools Recommendation
For good cutting results, saw blades with both flexibility and sharpness are recommended. Table saws, circular saws, and miter saws are all acceptable.
Table saws are a safe, easy to use, practical, and versatile way to cut. Table saw blades with a diameter of 7 to 9 inches and a small number of teeth are best suited for cutting wood-plastic composite panels.
A circular saw is a hand-held blade that cuts the deck by rotating and sharpening the teeth. If you use a blade with fewer teeth, the cutting speed will be faster.
A third tool that can be chosen is the miter saw. This tool has an adjustable blade, so it is also the most accurate way to cut.
Generally speaking, a blade with more teeth will give smoother results, and fewer teeth mean faster speeds.
When to cut?
Wood-plastic composite boards will extend or contract marginally with temperature changes. Composite boards become more flexible at higher temperatures, making them less advantageous to cut. In view of this, cooler morning temperatures are better for cutting.
Before cutting any material, please review the precautions, prepare the required tools, take safety precautions, and cut in a well-ventilated outdoor area.
- Dust mask
- Tape measure
How to cut WPC decking and WPC fence?
Cutting composite decking boards ought to be managed without harming its honesty so as not to harm the outer layer of the deck to stay away from decreasing the presentation of the deck. The cutting of composite materials has similarities to the cutting of ordinary wood.
- Measure the length: measure the length of the part to be installed with a tape measure
- Marking: Mark the exact cutting line on the board to be cut
- Leave space for an expansion gap at the edge of the board
- Determine the type of cut and determine the suitable cutting tool accordingly.